Dell PowerVault 720N Скачать руководство пользователя страница 485

Страница: 485 / 606

Command Reference A-71

NAME

ping - send ICMP ECHO_REQUEST packets to network hosts

SYNOPSIS

ping

[ -

] [ -

Rrv

]

host

[

packetsize

[

count

] ]

DESCRIPTION

ping

uses the ICMP protocols mandatory ECHO_REQUEST datagram to elicit an

ICMP ECHO_RESPONSE from the specified

host

or gateway. ECHO_REQUEST

datagrams have an IP and ICMP header, followed by a

struct

timeval

and then an

arbitrary number of bytes used to fill out the packet. If

host

responds,

ping

prints

host

is alive. Otherwise,

ping

will resend the ECHO_REQUEST once a sec-

ond. If the

host

does not respond after

count

seconds (default value is 20),

ping

will print no answer from

host

When the -

flag is specified,

ping

sends one datagram per second and prints

one line of output for every ECHO_RESPONSE that it receives.

ping

computes

the round-trip times and packet loss statistics. When the

count

number of pack-

ets have been sent or if the command is terminated with a ^C, the summary

statistics is displayed. The default

packetsize

is 56, which translates into 64 ICMP

bytes when combined with the 8 bytes of ICMP header.

OPTIONS

Record route. Includes the RECORD_ROUTE option in the ECHO_REQUEST

packet and displays the route buffer on returned packets. Note that the IP

header is only large enough for nine such routes. Many hosts ignore or dis-

card this option.

Bypass the normal routing tables and send directly to a host on an attached

network. If the host is not on a directly-attached network, an error is

returned.

Send one datagram every second.

Verbose output. ICMP packets other than ECHO_RESPONSE that are

received are listed.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 485 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: