Dell PowerVault 720N Скачать руководство пользователя страница 190

Страница: 190 / 606

6-8

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

&DQFHOLQJ$OO([SRUWV

To cancel all exports, enter the following command:

exportfs -au

8SGDWLQJ([SRUWV7KURXJKHWFH[SRUWV

When you make changes to the

/etc/exports

file, take one of the following actions to

make the changes take effect:

Run the

exportfs -a

command.

Reboot the filer.

If you delete entries from the

/etc/exports

file when you make changes, take one of

the following actions to activate the changes and ensure that deleted exports are

deactivated:

Run the following commands:

exportfs -au

exportfs -a

7DEOHH[SRUWIV&RPPDQG2SWLRQV6\QWD[

2SWLRQ

'HVFULSWLRQ

-a

Exports all the entries listed in the

/etc/exports

file.

-u

Unexports all the entries listed in the

/etc/exports

file.

NOTE: When you use the

-u

option with the

-a

option, all exports

are unexported regardless of whether they were created from the

/etc/exports file or with the

-o

option.

-i

Exports all the export entries listed in the

/etc/exports

file, but

ignores the options specified for the entries.

-v

Prints each path name as it is exported or unexported.

-o

Specifies the options for a volume or directory that you include in

the command line.

Example:

To export the

/vol/vol/home/terry

directory to the host

mixer with read/write access, you enter the following

command:

exportfs -o -rw=mixer /vol/vol0/home/terry

NOTE: Volumes and directories that are exported directly rather

than through the /etc/exports file remain exported until canceled

using the

-au

option or until the filer is rebooted.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 190 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: