Dell PowerVault 720N Скачать руководство пользователя страница 478

Страница: 478 / 606

A-64 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

symbolic links and will repeatedly loop on them. Users should use

caution when changing this option.

cifs.symlinks.enable

When

cifs.symlinks.enable

is on (the default), if the object being

accessed by a CIFS client is a symbolic link (whether absolute or

relative), the filer follows the link with the proviso that the ultimate

target turns out to reside within the originating share (thus ensuring

that the client has access permission to the target).

cifs.trace_login

When

cifs.trace_login

is on (the default is off), the filer logs all

lems on the filer.

console.encoding

Specifies how non-ASCII character information is presented. The

value can be:

nfs - NFS character set. You can use both NFS extended (> 0x7F)

and SGML characters for input.

sgml - SGML character format. You can use both NFS extended

(greater than 0x7F) and SGML characters for input.

utf8 - UTF-8 character sets. For input, any character greater than

0x7F is the beginning of a UTF-8 encoding.

The default is nfs.

dns.domainname

Sets the DNS domainname to the specified domainname.

dns.enable

Enables DNS client on the filer. The DNS domain must be set and

the

/etc/resolv.conf

file must exist prior to enabling DNS.

ip.path_mtu_discovery.enable

Enables/disables path MTU discovery; it is currently used only by

TCP. Path MTU discovery allows a host to discover the maximum

transmission unit, i.e. the largest link-level packet that can be trans-

mitted, over a path from that host to another host. This means that

the filer neednt choose a conservative packet size for a TCP con-

nection to a host not on the same net as the filer, but can attempt

to discover the largest packet size that can make it to the other host

without fragmentation.

httpd.enable

Enables HTTP access to the filer.

httpd.admin.enable

Enables HTTP access to the administration area of the filer, via a pri-

vate URL: any URL beginning with

/na_admin

is mapped to the

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 478 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: