Dell PowerVault 720N Скачать руководство пользователя страница 122

Страница: 122 / 606

3-26 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

they do not unmount the files and directories, they might see the Stale file han-

dle error message after the volume reversion.

2. If you know the name of the snapshot for reverting the volume, go to Step 5.

If you want to review the list of snapshots available for volume reversion, enter

the following command:

YROVQDSUHVWRUH

YROXPH

volume

is the name of the volume to be reverted. Enter the name only, not the

complete path.

You can enter multiple volume names in the command, separated by spaces.

Result:

The filer displays a warning message and prompts you to confirm your

decision for reverting the volume.

Between the time you enter the

vol snaprestore

command and the time

when reversion is completed, the filer stops deleting and creating snapshots.

3. Enter

to confirm that you want to revert the volume.

Result:

The filer displays a list of snapshots for you to choose from.

4. Enter the name of the snapshot for reverting the volume and go to Step 7.

Result:

The filer displays the name of the volume and the name of the snapshot

for the reversion. Then it asks whether you want to reboot the filer to proceed

with the reversion.

5. Enter the following command:

YROVQDSUHVWRUH

YROXPH

VQDSVKRW

YROXPH

VQDSVKRW

volume

is the name of the volume to be reverted. Enter the name only, not the

complete path.

snapshot

is the name of the snapshot for volume reversion.

You can enter multiple pairs of volume name and snapshot name in the

command.

Result:

The filer displays a warning message and prompts you to confirm your

decision for reverting the volume.

Between the time you enter the

vol snaprestore

command and the time

when reversion is completed, the filer stops deleting and creating snapshots.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 122 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: