Dell PowerVault 720N Скачать руководство пользователя страница 257

Страница: 257 / 606

Snapshots 9-5

$XWRPDWLF6QDSVKRW&UHDWLRQ

The filer uses the

snap sched

command to create snapshots automatically and to

keep them on-line for a predetermined amount of time.

7\SHVRI$XWRPDWLF6QDSVKRWV

Table 9-3 describes the three types of automatic snapshots.

7DEOH$XWRPDWLF6QDSVKRW7\SHV

7\SH

'HVFULSWLRQ

Weekly

The filer creates these every Sunday at midnight.

Weekly snapshots are called

weekly.n

, where

is an integer.

weekly.0

is the most recent weekly snapshot, and

weekly.1

is the

next most recent weekly snapshot.

When the filer creates a weekly snapshot, the value of

adjusted for all weekly snapshots. The higher the value of

, the

older the snapshot.

Nightly

The filer creates these every midnight except when a weekly

snapshot is scheduled to occur at the same time. If the number

of weekly snapshots is nonzero and its the day of the week that

weekly snapshots occur, no nightly snapshot is created.

Nightly snapshots are called

nightly.n

, where

is an integer.

nightly.0

is the most recent nightly snapshot, and

nightly.1

is the

next most recent nightly snapshot.

When the filer creates a nightly snapshot, the value of

adjusted for all nightly snapshots. The higher the value of

, the

older the snapshot.

Hourly

The filer creates these on the hour at specified hours, except at

midnight, if a nightly or weekly snapshot is scheduled to occur at

the same time. This occurs either if the number of nightly snap-

shots in the schedule is nonzero, or if the number of weekly

snapshots in the schedule is nonzero and its the day of the week

that weekly snapshots occur.

Hourly snapshots are called

hourly.n

, where

is an integer.

hourly.0

is the most recent hourly snapshot, and

hourly.1

is the

next most recent hourly snapshot.

When the filer creates an hourly snapshot, the value of

adjusted for all hourly snapshots. The higher the value of

, the

older the snapshot.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 257 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: