Dell PowerVault 720N Скачать руководство пользователя страница 473

Страница: 473 / 606

Command Reference A-59

NAME

nfsstat - display NFS statistics

SYNOPSIS

nfsstat

[

interval

]

nfsstat

[ -

] [ -

] -

[

address

host

name

]

nfsstat

[ -

]

nfsstat

DESCRIPTION

nfsstat

displays statistical information about NFS (Network File System) and RPC

(Remote Procedure Call) for the filer. It can also be used to reinitialize this infor-

mation. If no arguments are given,

nfsstat

displays statistical information since

last zeroed with the -

option (or since reboot if statistics have not been zeroed).

If the

interval

argument is specified,

nfsstat

continuously displays the summary

information for the following NFS requests: getattr, lookup, readlink, read, write,

create, remove, and readdir/readdirplus. The first line of data displayed, and every

20th line thereafter, contains cumulative statistics. Each subsequent line shows

incremental statistics for the

interval

(in seconds) since the last display.

Per-client statistics can also be collected and displayed by enabling the

nfs.per_client_stats.enable

options (using the

options

command - see

options

) and invoking

nfsstat

with the -

or the -

options. Per-client statistics are

collected for up to the first 256 NFS clients that have mounted the filesystem on

the given filer.

OPTIONS

Displays per-client statistics since last zeroed with the -

option (or since

reboot if statistics have not been zeroed). The statistics are displayed on a

per-client basis, with the IP address and host name (where available) of each

client being displayed at the head of each clients block of statistics.

If an optional IP address or host name is specified with the -

option, only

the statistics associated with this client are displayed.

Displays a list of the clients whose statistics have been collected on a per-

client basis, along with the total NFS calls for that client since last reboot, or

last zeroed with the -

option, the count being displayed both as the actual

count and as a percentage of calls from all clients.

Zeroes (reinitializes) the current statistics. (However, statistics since boot are

also retained.)

Includes reply cache statistics in the data displayed.

Displays the statistics since boot time, rather than since the last time they

were zeroed.

nfsstat

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 473 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: