Dell PowerVault 720N Скачать руководство пользователя страница 581

Страница: 581 / 606

Command ReferenceA-167

The protocol is comprised of the following commands, which are sent as indi-

cated - no spaces are supplied between the command and its arguments, or

between its arguments, and

indicates that a newline should be supplied:

device

mode

Open the specified

device

using the indicated

mode

device

is a tape name

of the form described in

tape

and

mode

is an ASCII representation of a deci-

mal number specifying how the tape is to be opened:

read-only

write-only

read-write

If a device had already been opened, it is closed before a new open is performed.

device

Close the currently open device. The

device

specified is ignored.

whence

offset

Performs no operation, and returns the value of

offset

; UNIX-style

lseek

operations are ignored on Dell filer tape devices, just as they are on tape

devices on many UNIX systems.

count

Write data onto the open device. If

count

exceeds the maximum data buffer

size (64 kilobytes), it is truncated to that size.

/etc/rmt

then reads

count

bytes from the connection, aborting if a premature end-of-file is encoun-

tered. The response value is the number of bytes written if the write

succeeds, or -1 if the write fails.

count

Read

count

bytes of data from the open device. If

count

exceeds the maxi-

mum data buffer size (64 kilobytes), it is truncated to that size.

/etc/rmt

then

attempts to read

count

bytes from the tape and responds with

count

read\

if the read was successful; otherwise an error in the standard format

is returned. If the read was successful, the data read is then sent.

operation

count

Perform a special tape operation on the open device using the specified

parameters. The parameters are interpreted as ASCII representations of the

decimal values.

operation

is one of:

write end-of-file marker

forward space

count

files

backward space

count

files

forward space

count

tape blocks

backward space

count

tape blocks

rmt

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 581 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: