Dell PowerVault 720N Скачать руководство пользователя страница 245

Страница: 245 / 606

HTTP Administration 8-5

87739LUWXDO)LUHZDOO

$7739LUWXDO)LUHZDOO

The HTTP virtual firewall feature enables you to maintain security on your filer.

You can restrict HTTP requests by marking the subnetwork interface over which they

arrive as untrusted. An untrusted interface provides only HTTP access to your filer

on a read-only basis.

Mark an interface untrusted if it meets all the following conditions:

You know you are going to service HTTP requests over that interface.

You dont want to allow requests through protocols other than HTTP.

You want to restrict access to the filer through that interface to read-only access.

By default, a subnetwork interface is trusted.

6\QWD[

Mark an interface as untrusted or trusted by setting an option to the

ifconfig

com-

mand. Following are examples of the command:

To mark the

interface as untrusted, enter the following command:

ifconfig e0 untrusted

To mark the

interface as trusted, enter the following command:

ifconfig e0 trusted

8VLQJRVWLQJ

$ERXWRVWLQJ

Virtual hosting enables a filer to respond to requests directed to more than one IP

address through a single physical interface. This means that a filer with only one phys-

ical interface can host several IP addresses.

Virtual hosting enables, for example, an Internet provider to host several Web sites

but have only one physical interface. An HTTP server can use the destination IP

address of an incoming HTTP request to find the directory that contains the HTTP

pages belonging to the virtual host.

7R6HW8SDQG(QDEOHRVWLQJ

To enable virtual hosting, you

direct HTTP requests by putting subdirectory and host or address entries in the

/etc/httpd.hostprefixes

file

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 245 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: