manualshive.com logo in svg

Dell PowerVault 720N, Справочник по командам, Страница: 469 / 606

Поделиться
Скачать
Dell PowerVault 720N Скачать руководство пользователя страница 469

Command Reference A-55

NAME

netstat - show network status

SYNOPSIS

netstat

 [ -

an

 ]

netstat

 -

mnrs

netstat

 -

i

 

|

 -

I

 

interface

 [ -

dn

 ]

netstat

 -

w

 

interval

 [ -

i

 

|

 -

I

 

interface

 ] [ -

dn

 ]

netstat

 [ -

p

 

protocol

 ]

DESCRIPTION

The 

netstat

 command symbolically displays the contents of various network-

related data structures. There are a number of output formats, depending on the 

options for the information presented. The first form of the command displays a 

list of active sockets for each protocol.

The second form presents the contents of one of the other network data struc-

tures according to the option selected.

The third form will display cumulative statistics for all interfaces or, with an 

inter-

face

 specified using the -

I

 option, cumulative statistics for that interface. It will 

also display the sum of the cumulative statistics for all configured network 

interfaces.

The fourth form continuously displays information regarding packet traffic on the 

interface that was configured first, or with an 

interface

 specified using the -

I

 

option, packet traffic for that interface. It will also display the sum of the cumula-

tive traffic information for all configured network interfaces.

The fifth form displays statistics about the protocol specified by 

protocol

.

OPTIONS

-

a

Show the state of all sockets; normally sockets used by server pro-

cesses are not shown.

-

d

With either interface display (option -

i

 or an interval, as described 

below), show the number of dropped packets.

-

I

 

interface

Show information only about this interface. When used in the third 

form with an 

interval

 specified as described below, information 

about the indicated 

interface

 is highlighted in a separated column. 

(The default interface highlighted is the first interface configured 

into the system.)

-

i

Show the state of interfaces that have been configured.

-

m

Show statistics recorded by the memory management routines for 

the network’s private pool of buffers.

netstat

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов