Dell PowerVault 720N Скачать руководство пользователя страница 578

Страница: 578 / 606

A-164 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

DNS - Domain Name System

DESCRIPTION

Domain Name Service provides information about hosts on a network. This ser-

vice has two parts: a resolver which requests information and a nameserver

which provides it.

Data ONTAP 5.3 supports only the resolver. When the filer needs to resolve a

host address, it first looks at the

/etc/nsswitch.conf

(see

nsswitch.conf

) file to

get the order in which various name services are to be consulted. If the name

services before DNS fail in their lookup and DNS is enabled, then the DNS name

server is contacted for address resolution.

DNS can be enabled on the filer by running the

setup

command (see

setup

) or by

manually editing the configuration files as described below. If DNS is enabled by

running the

setup

command, then the DNS domain name needs to be entered.

Enabling

DNS

without

the

setup

command:

Create the

/etc/resolv.conf

file (see

resolv.conf

) with up to 3 nameservers.

Each line contains the keyword

nameserver

followed by the IP address of

the server. For example:

nameserver 192.9.200.1

nameserver 192.9.201.1

nameserver 192.9.202.1

2. Edit the

/etc/rc

file (see

) to make sure that the option specifying the DNS

domain name is set and the option to enable DNS is on. For example:

options dns.domainname company.com

options dns.enable on

3. Reboot the filer for these changes to take effect. If the above options com-

mands are also entered from the console, the reboot can be avoided.

Enabling

DNS

with

the

setup

command:

At setup time, one can choose to enable DNS when prompted to do so.

setup

then queries for the Internet addresses of up to three DNS

nameservers.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 578 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: