Dell PowerVault 720N Скачать руководство пользователя страница 547

Страница: 547 / 606

Command ReferenceA-133

NAME

httpd.mimetypes - map of file suffixes to MIME Content-Type

SYNOPSIS

/etc/httpd.mimetypes

DESCRIPTION

For HTTP/1.0 and higher protocols, a MIME header is returned in the reply of

every GET request. This header includes a Content-Type field, whose contents

is determined by examining the suffix of the file being transmitted.

The

/etc/httpd.mimetypes

file contains the mapping of filename suffixes to

MIME Content-Type. The format of each line is: suffix, Content-Type. Comments

are introduced with a #.

The filer is not shipped with the

/etc/httpd.mimetypes

file. Instead, the filers

system files include a sample file named

/etc/httpd.mimetypes.sample

Before you start using HTTP, make a copy of

/etc/httpd.mimetypes.sample

and

name the copy

/etc/httpd.mimetypes

If the file

/etc/httpd.mimetypes

is not installed, the HTTP server looks for the

file

/etc/httpd.mimetypes.sample

as a fallback.

EXAMPLE

#map

.ps

files

PostScript

application/postscript

httpd.mimetypes

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 547 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: