Dell PowerVault 720N Скачать руководство пользователя страница 585

Страница: 585 / 606

Command ReferenceA-171

NAME

snmpd - snmp agent daemon

DESCRIPTION

The filer supports an SNMP version 1 compatible agent that provides support for

both the MIB-II management information base for TCP/IP based internets as well

as a Dell Custom MIB.

A number of user configurable options for the SNMP agent can be set and que-

ried from the console using the

snmp

command (see

snmp

Due to weak authentication in SNMP version 1, SetRequest commands that

allow the remote setting of configuration variables have been disabled.

MIB-II

Under MIB-II, information is accessible for the

system,

interfaces,

at,

ip,

icmp,

tcp,

udp

and

snmp

MIB-II groups. The transmission and egp groups

are not supported.

The

coldStart,

linkDown,

linkUp

and

authenticationFailure

traps are

implemented. Traps are configured using the

snmp

command.

Dell

CUSTOM

MIB

The Dell Custom MIB provides a means to obtain detailed information about

many aspects of filer operation via SNMP.

The following is a summary of the top-level groups in the Custom MIB and the

information they contain:

product

Product-level information such as the software version string and system ID.

sysStat

System-level statistics such as CPU uptime, idle time and aggregate kilo-

bytes received and transmitted on all network interfaces.

nfs

Statistics like those displayed by the

nfsstat

command (see

nfsstat

), includ-

ing statistics for each client if per-client NFS statistics have been enabled

using the

nfs.per_client_stats.enable

option (see

options

). The per-client

NFS statistics are indexed by client IP addresses.

quota

Information related to disk quotas, including the output of the quota report

command (see

quota

). To access quota information, quotas must be turned

on.

filesys

Information related to the file system, including the equivalent of the

max-

files

and

commands, and some of the information from the

snap

list

command (see

maxfiles

snap

snmpd

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 585 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: