Dell PowerVault 720N Скачать руководство пользователя страница 110

Страница: 110 / 606

3-14 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

4. If the filer renamed the foreign volume because of a name conflict, type the fol-

lowing command to rename the volume:

YROUHQDPH

ROGQDPHQHZQDPH

Example:

The following command renames the volume

vol0(1)

vol1

YROUHQDPHYROYRO

5. Type the following command to bring the volume on-line in the new filer, replac-

ing

volume_name

with the name of the volume:

YRORQOLQH

YROXPHBQDPH

6. Enter the following command to confirm that the added volume came on-line:

YROVWDWXV

'HVWUR\LQJD9ROXPH

To destroy a volume, turning its disks back into spare disks, perform the following

steps.

To deactivate the volume, enter

YRORIIOLQH

YROXPH

2. Enter the

reboot

command to reboot the filer.

3. To destroy the volume, enter

YROGHVWUR\

YROXPH

5HQDPLQJD9ROXPH

To rename a volume, perform the following steps

Enter

YROUHQDPH

ROGYROXPHQHZYRO

2. Update the

/etc/exports

file and run

exportfs

3. Update any CIFS shares that refer to the volume.

+DQGOLQJ9ROXPH)DLOXUHV

A volume might fail because of an

inconsistent

directory or a double-disk failure. If the

system does not reboot after a volume failure, take the volume off-line, as follows:

Boot the filer from a system boot diskette into maintenance mode.

2. Use the

vol

command to take the failed volume off-line.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 110 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: