manualshive.com logo in svg

Dell PowerVault 720N, Справочник по командам, Страница: 374 / 606

Поделиться
Скачать
Dell PowerVault 720N Скачать руководство пользователя страница 374

18-2 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

3URFHGXUHIRU%RRWLQJ)URP'LVNHWWH

To display the boot menu from a diskette, perform the following steps:

1.

Insert the diskette labeled System Boot Disk 1 into the filer’s diskette drive.

NOTE: The Data ONTAP 5.3 system boot diskettes are specific to the model of 

filer that you are updating. You received diskettes appropriate to the model you 

are updating. If you have different models, be sure to check the diskette labels to 

make sure you’re using the correct diskettes for the filer.

2. From the system console, enter the 

reboot

 command or, if the system is pow-

ered off, power it on.

Result: 

The filer begins the boot process.

3. When the filer’s LCD prompts you to, remove the diskette and insert the diskette 

labeled System Boot Disk 2 into the filer’s diskette drive.

4. Press the Enter key on your console. 

Result: 

The filer boots and, if it can, displays the following boot menu:

1RUPDO%RRW

%RRWZLWKRXWHWFUF

&KDQJH3DVVZRUG

,QLWLDOL]HDOOGLVNV

0DLQWHQDQFHPRGHERRW

6HOHFWLRQ"

5. Choose one of the boot types shown below by entering the corresponding 

number.

‡

Normal Boot (1) — Use Normal Boot to run the filer normally, but

from a diskette.

‡

Boot without 

/etc/rc

 (2) — Use Boot without 

/etc/rc

 to troubleshoot 

and repair configuration problems.

NOTE: Booting without 

/etc/rc

 causes the filer to use only default options 

settings, disregard all options settings you put in 

/etc/rc

, and disable some 

services, such as 

syslog

.

‡

Change Password (3) — Use Change Password to reset your filer’s adminis-

trative password.

‡

Initialize all disks (4) — Use Initialize all disks to zero all disks attached to the 

filer.

NOTE: This action will result in a loss of all data on the disks.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов