Dell PowerVault 720N Скачать руководство пользователя страница 444

Страница: 444 / 606

A-30 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

Another advantage of running the

dump

command through

rsh

is that you can

control backups from UNIX shell scripts or crontab entries.

OPTIONS

Dump levels. A level 0, full backup, guarantees the entire file system is

copied. A level number above 0, incremental backup, tells dump to copy

all files new or modified since the last dump of a lower level. The default

level is 0.

files

Write the backup to the specified

files

may be:

a list of the names of local tape devices, in the form specified in

tape

;

a list of the names of tape devices on a remote host, in the form

host:devices

;

the standard output of the dump command, specified as -.

The list may have a single device or a comma-separated list of devices;

note that the list must either contain only local devices or only devices

on a remote host and, in the latter case, must refer to devices on one

particular remote host, e.g.

tapemachine:/dev/rst0,/dev/rst1

Each file in the list will be used for one dump volume in the order listed;

if the dump requires more volumes than the number of names given,

the last file name will used for all remaining volumes after prompting for

media changes.

Use

sysconfig

for a list of local tape devices. See below for an exam-

ple of a dump to local tape.

For a dump to a tape device on a remote host,

host

must support the

standard UNIX

rmt

remote tape protocol.

By default,

dump

writes to standard output.

blocks

Set the size of the dump file to the specified number of 1024-byte

blocks, If this amount is exceeded,

dump

will close the current file and

open the next file in the list specified by the

option. If there are no

more files in that list,

dump

will re-open the last file in the list, and

prompt for a new tape to be loaded.

It is recommended to be a bit conservative on this option.

This is one way to allow

dump

to work with remote tape devices that

are limited to 2 GB of data per tape file.

Update the file

/etc/dumpdates

after a successful dump. The format of

/etc/dumpdates

is readable by people. It consists of one free format

record per line: subtree, increment level and

ctime

format dump date.

There may be only one entry per subtree at each level. The dump date is

defined as the creation date of the snapshot being dumped. The file

dump

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 444 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: