Dell PowerVault 720N Скачать руководство пользователя страница 569

Страница: 569 / 606

Command ReferenceA-155

debug

Debug messages used for diagnostic purposes. These messages

are suppressed by default.

If a received message matches the specified

facility

and is of the specified

level

(or a higher

level

), the action specified in the

action

field will be taken.

Multiple

selectors

may be specified for a single

action

by separating them with

semicolon (;) characters. It is important to note, however, that each

selector

can modify the ones preceding it.

Multiple

facilities

may be specified for a single

level

by separating them with

comma (,) characters.

An asterisk (*) can be used to specify all

facilities

or all

levels

The special

level

none

disables a particular

facility

The

action

field of each line specifies the action to be taken when the

selector

field selects a message. There are four forms:

A pathname (beginning with a leading slash). Selected messages are

appended to the specified file.

A hostname (preceded by an at (@) sign). Selected messages are for-

warded to the

syslogd

daemon on the named host.

/dev/console. Selected messages are written to the console.

An asterisk. Selected messages are written to the console.

Blank lines and lines whose first non-blank character is a pound (#) character

are ignored.

It is recommended that all

/etc/syslog.conf

files include the line

*.info /etc/messages

so that all messages are logged to the /etc/messages file.

EXAMPLES

A configuration file might appear as follows:

# Log all kernel messages, and anything of level err or

# higher to the console.

*.err;kern.* /dev/console

# Log anything of level info or higher to /etc/messages.

*.info /etc/messages

# Also log the messages that go to the console to a remote

# loghost system called adminhost.

*.err;kern.* @adminhost

# The /etc/secure.message file has restricted access.

auth.notice /etc/secure.message

syslog.conf

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 569 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: