Dell PowerVault 720N Скачать руководство пользователя страница 278

Страница: 278 / 606

10-8 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

&KDQJLQJ2SORFNV6HWWLQJV

To change the oplocks setting of a qtree, follow these steps:

Make sure that the

cifs.oplocks.enable

option is set the way you want.

2. Use the qtree oplocks command, as follows:

TWUHHRSORFNV>

QDPH

>HQDEOH_GLVDEOH@@

The command takes effect immediately.

NOTE: If you disable the oplocks feature on a qtree, existing oplocks in the qtree are

not broken.

([DPSOH:LWK$TWUHH

To enable oplocks in the

/vol/users/docs

qtree if oplocks are disabled and the

cifs.oplocks.enable

option is set to On, enter the following command:

qtree oplocks /vol/users/docs enable

([DPSOH:LWK$9ROXPH

To disable oplocks in the entire

users

volume if oplocks are enabled and the

cifs.oplocks.enable

option is set to On

enter the following command:

qtree oplocks /vol/users/ disable

This disables only files and directories that were not in a qtree when oplocks were

enabled.

(IIHFWRIWKHFLIVRSORFNVHQDEOH2SWLRQ

Setting the

cifs.oplocks.enable

option has the following effects:

If the

cifs.oplocks.enable

option is set to Off, all oplocks on the filer are

turned off.

If the

cifs.oplocks.enable

option is set back to On, the setting for each

qtree comes into effect and oplocks are turned on for those qtrees where oplocks

are enabled.

'LVSOD\LQJTWUHH,QIRUPDWLRQ

+RZWR'LVSOD\TWUHH,QIRUPDWLRQ

To display all attributes of all qtrees on a filer, use the

qtree

command with no

arguments.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 278 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: