Dell PowerVault 720N Скачать руководство пользователя страница 481

Страница: 481 / 606

Command Reference A-67

telnet.enable

Enables the Telnet server on the filer.

telnet.hosts

Specifies up to 5 clients that will be allowed telnet access to the

server. The host names should be entered as a commaseparated

list with no spaces in between. Enter a * to allow access to all cli-

ents; this is the default. Enter a - to disable telnet access to the

server.

timed.enable

Determines whether a time daemon (

timed

) runs on the filer. If

timed.enable

is on, the filer synchronizes its time with a time

server.

timed.log

Specifies whether time changes initiated by timed should be

logged to the console.

timed.max_skew

Specifies the maximum amount of skew between the time

reported by the time server and the filers time that we will allow

when synchronizing the time. If the difference in the time reported

by the server and the filers time is greater than this value, the filer

will not synchronize to the time reported by the time server. The

maximum skew is specified in seconds (suffix s), minutes (suffix

m), or hours (suffix h). Defaults to 30m.

timed.proto

Specifies the protocol used to synchronize time. rdate specifies

the rdate; sntp specifies the Simple Network Time Protocol.

timed.sched

Specifies the timed synchronization schedule. There are several

pre-defined schedules:

hourly

synchronize every hour (the default)

multihourly

synchronize every 6 hours

daily

synchronize every day at midnight

Custom schedules may also be specified by giving the number of

minutes or hours between time synchronization. Minutes are spec-

ified by digits followed by an m; hours are specified by digits

followed by an h. For example,

options

timed

sched

will cause

time to be synchronized every two hours.

To avoid overburdening the time server, the filer randomly selects

the exact time of the synchronization within a 20-minute window.

timed.servers

Specifies up to five time servers used by the time daemon. Time

servers are contacted in the order specified; if a server cant be

contacted, the time daemon tries the next one in the list.

options

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 481 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: