Dell PowerVault 720N Скачать руководство пользователя страница 148

Страница: 148 / 606

4-24 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

After you complete this procedure, the link you specify is the active link and the other

links are not active.

NOTE: If no links are preferred, the active link is selected randomly.

6WHS

To specify an interface you prefer to be the active link in a single-mode trunk, enter

the following command or put it in the in the

/etc/rc

file:

YLIIDYRU

LQWHUIDFH

(where

LQWHUIDFH

is the name of an interface).

5HPRYLQJD/LQN)URP3UHIHUUHG6WDWXVLQ

D6LQJOH0RGH7UXQN

'HVFULSWLRQ

Use this procedure to remove a link from preferred status in a single-mode trunk. A

preferred link has priority for being the active link. You might want to perform this pro-

cedure if you are replacing or upgrading a physical interface that is currently the

preferred link and want to stop using it.

NOTE: There can only be one preferred link in a trunk.

After you complete this procedure, the currently preferred link is not the preferred

link, and you can use the

vif favor

command to make another link the preferred

link.

6WHS

To remove a link from preferred status in a single-mode trunk, enter the following

command:

YLIQRIDYRU

LQWHUIDFH

(where

LQWHUIDFH

is the name of an interface).

&UHDWLQJD0XOWLSOH0RGH7UXQN

'HVFULSWLRQ

Use this procedure to create a trunk in which all interfaces are active at the same

time, thereby increasing throughput. After you complete this procedure, you have

increased throughput compared to using only a single interface. You can perform this

procedure any time you have a configured switch and the physical interfaces available.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 148 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: