Dell PowerVault 720N Скачать руководство пользователя страница 437

Страница: 437 / 606

Command Reference A-23

NAME

df - display free disk space

SYNOPSIS

[

-i

] [

pathname

]

DESCRIPTION

displays statistics about the amount of free disk space in one or all volumes on

the filer. All sizes are reported in 1024-byte blocks.

The

pathname

parameter is the path name to a volume. If it is specified,

reports only on the corresponding volume; otherwise, it reports on every on-line

volume.

For each volume,

displays statistics about snapshots on a separate line from

statistics about the active file system. The snapshot line reports the amount of

space consumed by all the snapshots in the system. Blocks that are referenced

by both the active file system and by one or more snapshots are counted only in

the active file system line, not in the snapshot line.

If snapshots consume more space than has been reserved for them by the

snap

reserve

command (see

snap

), then the excess space consumed by snapshots is

reported as used by the active file system as well as by snapshots. In this case, it

may appear that more blocks have been used in total than are actually present in

the file system.

With the

-i

option,

displays statistics on the number of free inodes.

EXAMPLES

The following example shows file system disk space usage:

filer> df

Filesystem

kbytes used avail capacity Mounted on

/vol/vol0

4339168 1777824 2561344 41% /vol/vol0

/vol/vol0/.snapshot 1084788 956716 128072 88% /vol/vol0/.snapshot

If snapshots consume more than 100% of the space reserved for them, then

either the snapshot reserve should be increased (using

snap

reserve

) or else

some of the snapshots should be deleted (using

snap

delete

). After deleting

some snapshots, it may make sense to alter the volumes snapshot schedule

(using

snap

schedule

) to reduce the number of snapshots that are kept on line.

The following example shows file system inode usage for a specified volume:

filer df -i /vol/vol0

Filesystem iused ifree %iused Mounted on

/vol/vol0 164591 14313 92% /vol/vol0

You can increase the number of inodes in a file system at any time using the

maxfiles

command (see

maxfiles

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 437 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: