Dell PowerVault 720N Скачать руководство пользователя страница 430

Страница: 430 / 606

A-16 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

Changing

the

settings

existing

To change the settings of an existing share, use the -

change

option:

cifs

change

sharename

{ -

comment

description

| -

nocomment

}

{ -

maxusers

userlimit

| -

nomaxusers

}

{ -

forcegroup

groupname

| -

noforcegroup

}

The settings of a share can be changed at any time, even if the share is in use.

sharename

is the name of the existing share that is to be changed.

comment

description

changes the description of the share. For more information about the share

description setting, see the

Creating

new

section, above.

-nocomment

changes the description of the share to an empty string.

maxusers

userlimit

changes the user limit on the share. For more information about the user

limit setting, see the

Creating

new

section, above.

-nomaxusers

removes the user limit on the share.

forcegroup

groupname

changes the forcegroup setting. For more information about the forcegroup

setting, see the

Creating

new

section, above.

noforcegroup

specifies that files to be created in the share do not belong to a particular

UNIX group. That is, each file belongs to the same group as the owner of the

file.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 430 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: