Dell PowerVault 720N Скачать руководство пользователя страница 454

Страница: 454 / 606

A-40 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

atime

Time of last read or write (in seconds).

mtime

Time of last write (in seconds).

ctime

Time of last size/status change (in seconds).

crtime

Time file was created (in seconds).

atimeage Age of last read or write (Now - atime).

mtimeage Age of last write (Now - mtime).

ctimeage Age of last size/status change (Now ctime).

crtimeage Age of file creation (Now - crtime).

timetype

This lets you specify the type of time that will be used in the age compari-

son. Valid values for

time_

ype

are

Access time

Modification time

Change time (last size/status change)

Creation time

sizes

Specifies the breakdown of sizes, as a comma-separated set of size values.

The values are in bytes, but as a convenience you can add a K, M, or G suffix

to a number to get kilobytes, megabytes, and gigabytes. For example,

500K,2M,1G would produce a breakdown with 4 categories - files less

than 500K, files less than 2 megabytes, files less than 1 gigabyte, and all

other files.

To produce a breakdown that includes all unique file sizes, specify * for the

sizes value.

style

Controls the style of output - the possible value for

count

are readable (the

default), table (colonseparated values suitable for processing by pro-

grams), and html.

EXAMPLES

Produce default file usage breakdowns for snapshot

hourly

of volume

vol0

filestats

volume

vol0

snapshot

hourly.1

2. Produce file usage breakdowns by monthly age values:

filestats

volume

vol0

snapshot

hourly.1

ages

30D,60D,90D,120D,150D,180D

filestats

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 454 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: