Dell PowerVault 720N Скачать руководство пользователя страница 467

Страница: 467 / 606

Command Reference A-53

NAME

mt - magnetic tape positioning and control

SYNOPSIS

[ -

| -

tapedevice

]

command

[

count

] [

command

[

count

] ... ]

DESCRIPTION

is used to position or control the specified magnetic tape drive supporting the

commands listed below. Commands that support a

count

field allow multiple

operations to be performed (the rewind, status and offline commands do not sup-

port a count field).

will output failure messages if the specified tape drive

cannot be opened or if the operation fails.

The -

option specifies which tape device to use. Use

sysconfig

to list all tape

devices on the filer. -

has the same effect as -

USAGE

eof

weof

Writes

count

end-of-filemarks beginning at the current position on

tape.

fsf

Forward spaces over

count

filemarks. Positions the tape on the

end-of-tape side of the filemark.

bsf

Backward spaces over

count

filemarks. Positions the tape on the

beginning-of-tape side of the filemark.

fsr

Forward spaces

count

records. Positions the tape on the end-of-

tape side of the record(s).

bsr

Backward spaces

count

records. Positions the tape on the

beginning-of-tape side of the record(s).

erase

Erases the tape beginning at the current tape position. When the

erase completes, the tape is positioned to beginning-of-tape.

rewind

Rewinds the tape, positioning the tape to beginning-of-tape.

status

Displays status information about the tape unit.

offline

Rewinds the tape and unloads tape media.

diag

Enables or disables display of diagnostic messages from tape

driver. Enabling diagnostic messages can be helpful when attempt-

ing to diagnose a problem with a tape device. Specifying a count of

1 enables display of diagnostic messages, a count of 0 dis-

ables diagnostic messages. Diagnostic messages are

dis

bled

default.

eom

Positions the tape to end of data (end of media if tape is full).

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 467 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: