manualshive.com logo in svg

Dell PowerVault 720N, Справочник по командам, Страница: 576 / 606

Поделиться
Скачать
Dell PowerVault 720N Скачать руководство пользователя страница 576

A-162 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

18. Output from 

sysconfig

 -

r

19. The 

/etc/messages

 file

The autosupport feature is manipulated through the 

options

 command (see 

options

).

The options choices are:

autosupport.enable

:

on

,

off

autosupport.mailhost

:

Comma-separated list (no spaces)

autosupport.to

:

Comma-separated list (no spaces)

autosupport.noteto

:

Comma-separated list (no spaces)

autosupport.from

:

Local user name

autosupport.doit

:

text word describing reason

autosupport.enable:

 Default is 

on

. This option is a switch to enable/disable the auto-

support email feature. Customers who wish to disable autosupport permanently will 

need to set the option in 

/etc/rc

 with the command

options

 

autosupport.enable

 

off

autosupport.mailhost

: Default is 

mailhost

. Enter the list of mailhosts separated by 

”,” and no spaces. Up to 5 hosts will be accepted. The autosupport mechanism will try 

to contact each listed host in turn until it gets a successful SMTP connection. The 

default mailhost address is set to the 

adminhost

 address in 

/etc/hosts

 with a com-

mand such as

options

 

autosupport.mailhost

 

mercury,venus,mars

autosupport.to

: Enter the list of recipients separated by ”,” and no spaces. Up to 5 

email addresses may be listed with a command such as

options

 

autosupport.to

 

sysadm,[email protected]

autosupport.noteto

: Default is an empty list (short note will not be sent). Enter the 

list of recipients separated by ”,” and no spaces. Up to 5 email addresses may be 

listed with a command such as

options autosupport.noteto

 

[email protected],[email protected]

autosupport

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов