Dell PowerVault 720N Скачать руководство пользователя страница 127

Страница: 127 / 606

Network Administration 4-3

6103&RPPDQGV6XSSRUWHGE\'HOO

SNMP commands that Dell supports are described in detail in the

snmp

(1) man page.

The following paragraphs provide brief explanations of these commands:

snmp contact ’[email protected] 555-555-1212’

Sets the email address and telephone number of the person responsible for the

filer. You can include the persons full name, but an email address and a tele-

phone number enable the administrator to contact the right person after

receiving an automatic email message.

snmp location ’ABC corporation, engineering lab’

Sets the physical location of the filer. This value is returned by the SNMP agent.

snmp community add ro private

Creates a read-only community called

private

. The SNMP manager uses the

community name as a password to communicate with the filers SNMP agent.

snmp traphost add snmp-mgr1

Makes the system

snmp-mgr1

the recipient of all SNMP traps from the filer.

snmp init 1

Initializes the SNMP daemon with the values specified with

snmp

commands.

This command also sends the SNMP cold start and links up or down traps, as

appropriate, to any trap hosts that were previously registered using the

snmp

traphost

command. This command should be the last SNMP command in the

filers

/etc/rc

file.

snmp traps

Generates asynchronous notification of events, called traps.

$ERXWWKH'HOO&XVWRP0,%

The Dell custom MIB provides detailed information about many aspects of filer opera-

tion. You must use Dell custom MIB 1.1.2 or higher. It contains objects that help you

manage multivolume features.

Where to get the MIB:

You can obtain the custom MIB from the Data ONTAP 5.3 CD.

To locate the MIB on the CD, read the

contents.txt

file.

Installing the MIB:

Install the MIB file on your network management workstation

according to the installation procedure for your workstation, so that your workstation

can obtain information from the filer about the objects that are part of the MIB.

Using deprecated single-volume objects:

Single-volume objects

are

deprecated

but you can use them for single-volume systems as before. If you are using a single-

volume filer, you do not need to make changes to use the new MIB.

Finding multivolume objects:

The descriptions of the deprecated single-volume

objects contain the names of the corresponding new

multivolume objects

. For

multivolume objects, use the new objects rather than the deprecated ones.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 127 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: