Dell PowerVault 720N Скачать руководство пользователя страница 450

Страница: 450 / 606

A-36 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

root=

hostname

[:hostname]...

Give root access only to the specified hosts. By default, no hosts are granted

root access. Netgroup names are not allowed in the list.

When you export a file or directory using the

, or

root

option, you can spec-

ify that the file or directory be exported to a subnet instead of individual hosts.

You cannot export to a subnet when using the

access

option.

Instead of specifying a host name or netgroup name in the

exportfs

command,

specify the subnet in one of the following formats:

dotted

num

bits

The

dotted

field is either an IP address or a subnet number. The

num

bits

field

specifies the size of the subnet by the number of leading bits of the netmask.

[

network

]

subnet

[

netmask

]

netmask

The

subnet

field is the subnet number. The

netmask

field is the netmask.

In UNIX, it is illegal to export a directory that has an exported ancestor in the

same file system. Data ONTAP 5.3 does not have this restriction. For example,

you can export both the

directory and the

/home

directory. In determining per-

missions, the filer uses the longest matching prefix.

EXAMPLES

In the following example, all network clients can mount the

/home

directory but

only the

adminhost

can mount the

directory:

exportfs -o access=adminhost,root=adminhost /home

exportfs /

The following examples show different forms of the

exportfs

command that

export the

/home

directory to the 123.45.67.0 subnet with the 255.255.255.0

netmask:

exportfs -o rw=123.45.67.0/24 /home

exportfs -o rw=123.45.67/24 /home

exportfs -o rw=network 123.45.67.0 netmask 255.255.255.0

exportfs -o rw=123.45.67.0 255.255.255.0

FILES

/etc/exports

directories and files exported to NFS clients

/etc/hosts

host name data base

/etc/netgroup

network groups data base

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 450 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: