Dell PowerVault 720N Скачать руководство пользователя страница 499

Страница: 499 / 606

Command Reference A-85

In addition, when

routed

is running, it deletes dynamic routes, created by ICMP

redirects, every 3 minutes.

USAGE

routed

The route daemon may be turned on at any time with the

routed

command. This causes

routed

to read the

/etc/

dgateways

file, and turn on RIP snooping, dynamic route time-

outs, and default gateway selection. If

routed

is already

running, this option causes it to reread the

/etc/dgateways

file, and reinitialize. By default,

routed

is invoked at boot time

/etc/rc

routed

off

The route daemon may be turned off at any time with the

routed

off

command. This stops all RIP snooping, default gate-

way selection, and dynamic route timeouts. The currently

selected default gateway is not be deleted when

routed

turned off.

routed

status

Displays the status of the default gateway list. This shows

whether RIP snooping is active, the current list of default gate-

ways, their metrics, the state of the gateways (ALIVE or

DEAD), and the last time each gateway was heard from. The

output looks like:

OPTIONS

If this option precedes

status

, the command displays numeric values for

gateway names.

maytag> routed status

RIP snooping is on

Gateway Metric State Time Last Heard

alantec1 Wed

1 ALIVE

Mar 9 03:38:41 GMT 1994

groucho Wed

1 ALIVE

Mar 9 03:38:41 GMT 1994

192.9.200.66

1 ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.77

1 ALIVE

Wed Mar 9 03:38:41 GMT 1994

tphub1 Wed

2 ALIVE

Mar 9 03:38:41 GMT 1994

192.9.200.32

2 ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.252

3 ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.251

4 ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.250

5 ALIVE

Wed Mar 9 03:38:41 GMT 1994

119 free gateway entries, 9 used

routed

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 499 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: