Dell PowerVault 720N Скачать руководство пользователя страница 540

Страница: 540 / 606

A-126 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

hosts - host name data base

SYNOPSIS

/etc/hosts

DESCRIPTION

The

hosts

file contains information regarding the known hosts on the network.

For each host a single line should be present with the following information:

Internet

address

official

host

name

aliases

Items are separated by any number of blanks and/or tab characters. A # indi-

cates the beginning of a comment; characters up to the end of the line are not

interpreted by routines which search the file.

This file may be created from the official host data base maintained at the Net-

work Information Control Center (NIC), though local changes may be required to

bring it up to date regarding unofficial aliases and/or unknown hosts.

Network addresses are specified in the conventional . (dot) notation. Host

names may contain any alphanumeric character, but not field delimiters, newline,

or comment characters.

FILES

/etc/hosts

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 540 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: