Dell PowerVault 720N Скачать руководство пользователя страница 325

Страница: 325 / 606

Data Recovery 13-11

last tape file that was successfully used for restoring data. You do not have to start

the command from the beginning of the backup.

5HVWULFWLRQV

The

restore

command has the following restrictions:

You can restart a

restore

command only if the backup consists of multiple

tape files. If the backup contains only one tape file, simply reenter the

restore

command to start the recovery from the beginning of the backup.

You can restart a

restore

command only if the command is for a full restore. If

the

restore

command is for extracting an individual file or subtree from a

backup (that is, if you use the

function key), you cannot restart the command.

6WHSV

Enter the same

restore

command as the one that was interrupted with the follow-

ing changes:

Replace the

function key with the

function key to indicate that you want to

restart the

restore

command.

Use the appropriate tape file name for the

function key. The tape file should be

the one used by the original

restore

command when it was interrupted.

([DPSOH

In this example, the following

restore

command was entered on the filer console

for performing a full restore from three tape files in a tape stacker:

restore rfD urst0a,urst0a,rst0a /vol/vol0

When the

restore

command is recovering data from the second tape file, it is

interrupted by a Ctrl-C entered on the filer console. Because the second tape file is on

an unload/reload device, the filer closes the file and ejects the tape when the

restore

command is interrupted.

To restart the

restore

command, reload the second tape file and enter the follow-

ing command.

restore RfD urst0a,rst0a /vol/vol0

The

restore

command restarts data recovery from the beginning of the second

tape file of the backup.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 325 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: