Dell PowerVault 720N Скачать руководство пользователя страница 188

Страница: 188 / 606

6-6

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

5HVWULFWLQJ$FFHVVWRKRPH

You can restrict access to the

/home

directory to particular groups by

using the

chmod

command to change access modes for the directory

using the

-rw

-access

options in the

/etc/exports

file to limit write privilege

to specific hosts

7KHDFFHVV2SWLRQ

The

-access

option lists the hosts that can mount exported directories. When you

use the

-access

option, only the hosts listed can mount the associated directory.

6\QWD[

The syntax for the

-access

option is as follows:

-access=

hostname[:...:hostname]

/LPLWV

There is no limit to the number of host names you can specify with the

-access

option. However, the length of a line in the

/etc/exports

file cannot exceed 1,024

characters.

NOTE: If you cannot fit all the host names in a 1,024-character line, you can use net-

groups in place of host names.

7KHURRW2SWLRQ

The

-root

option lists the hosts that can mount exported directories as root. Hosts

that mount exported directories as root have full control over the directories and can

perform the following operations:

Create and delete directories and files.

Change ownership and group associations of directories and files.

Set access permissions for directories and files.

6\QWD[

The syntax for the

-root

option is as follows:

-root=

hostname[:...:hostname]

/LPLWV

You can specify 1 to 256 host names with the

-root

option.

5HVWULFWLRQV

You cannot use netgroup names with the

-root

option.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 188 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: