Dell PowerVault 720N Скачать руководство пользователя страница 266

Страница: 266 / 606

9-14 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

If you do not want the total amount of disk space consumed by all snapshots to

exceed a certain percentage of the used disk space, use the cumulative values in the

snap list

output to determine which snapshots to delete. In the preceding exam-

ple, if you dont want more than 5% of used disk space to be spent by snapshots,

delete all snapshots listed below

nightly.1

in the

snap list

output; that is,

nightly.2

nightly.3

, and

nightly.4

. After deleting the snapshots,

nightly.1

and all the other more

recent snapshots consume 5% of the used disk space.

&KDQJLQJWKH6QDSVKRW5HVHUYH

The snapshot reserve can be used only by snapshots, not by the active file system.

The default snapshot reserve is 20% of the available disk space. To change the

reserve, enter the following command:

snap reserve

volume_name percent

For example:

snap reserve vol0 25

With no arguments, the

snap reserve

command displays the percentage of disk

space reserved for snapshots in each volume.

NOTE: Snapshots can exceed the snapshot reserve space.

$GMXVWLQJ'LVN6SDFH8VHGE\6QDSVKRWV

This section describes how to use the

snap list

output to determine which snap-

shot file to delete to free the most disk space.

In the sample

snap list

output in Displaying Snapshot Statistics, the cumulative

disk space used by snapshots gradually increases from top to bottom.

For example, in the %/used column, the cumulative space used by

hourly.1

is 2% and

the cumulative space used by

hourly.2

is 3%. This is not always the case.

([DPSOH

Consider a filer with a 100-MB file system that has not changed since the first snap-

shot was taken. The

snap list

command on this filer displays the following output:

%/used %/total date name

-------- --------- ------------ ---------

0% (0%) 0% (0%) May 05 16:00 hourly.0

0% (0%) 0% (0%) May 05 12:00 hourly.1

0% (0%) 0% (0%) May 05 08:00 hourly.2

The cumulative disk space used by snapshots does not increase because no changes

were made to the file system. However, if you had deleted 20 MB from the file

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 266 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: