Dell PowerVault 720N Скачать руководство пользователя страница 289

Страница: 289 / 606

Quotas and Maximum Number of Files11-9

:KHQ4XRWDV$UH([FHHGHG

This section describes how the filer responds when quotas are exceeded and what

users see on the client systems.

0HVVDJHV'LVSOD\HGE\WKH)LOHU:KHQ4XRWDV$UH([FHHGHG

When it receives a write request, the filer first determines whether the file to be writ-

ten is in a qtree. If the write would exceed the qtree quota, the filer logs the following

error message:

tid

tree_id: tree quota exceeded on volume_name

If the qtree is not full but the write would cause either the user or group quota to be

exceeded, the filer logs one of the following errors:

uid

user_id: disk quota exceeded

gid

group_id: disk quota exceeded

where

user_id

is the users UID and

group_id

is the groups GID.

To the client, the filer returns an out of disk space error to the NFS write request or

a disk full error to the CIFS write request. The following sections describe how the

clients notify the users about quotas being exceeded.

0HVVDJHV'LVSOD\HGRQ1)6&OLHQWV

If a write from an NFS client to a filer causes a quota to be exceeded, the user experi-

ence depends on the operating system version and the application.

If a UNIX client mounts a filer without the

noquota

option, the

program on

the client checks to see whether the user has reached the disk quota and file quota

each time the user tries to log in to the client. The client displays a message to alert

the user before displaying the system prompt if a quota was reached. In the following

example, a user reached the disk quota on the filer mounted as

/t/filer

on a client

named client2:

rlogin client2

You have mail.

Block limit reached on /t/filer

client2%

Not all versions of UNIX perform the quota check as described in this section. Also,

the exact message printed varies from one version to another.

If a write causes a quota to be exceeded, the error message seen by the user

depends on the application. For example, on a SunOS 4.x client, if a user tries to save

a file using

when his or her disk quota is reached, the error message is

Disc quota exceeded [Warning - /t/filer/home/jdoe/file1 is incomplete]

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 289 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: