Dell PowerVault 720N Скачать руководство пользователя страница 552

Страница: 552 / 606

A-138 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

networks - network name data base

SYNOPSIS

/etc/networks

DESCRIPTION

The

networks

file contains information regarding the known networks which

comprise the Internet. For each network a single line should be present with the

following information:

official

network

name

network

number

aliases

Items are separated by any number of blanks and/or tab characters. A # indi-

cates the beginning of a comment; characters up to the end of the line are not

interpreted by routines which search the file. This file is normally created from

the official network data base maintained at the Network Information Control

Center (NIC), though local changes may be required to bring it up to date regard-

ing unofficial aliases and/or unknown networks.

Network number may be specified in the conventional . (dot) notation or as a

32 bit integer. Numbers may be specified in decimal (default), octal or hexadeci-

mal. A number is interpreted as octal if it starts with the digit 0. A hexadecimal

number must begin with 0x or 0X. Network names may contain any print-

able character other than a field delimiter, newline, or comment character.

FILES

/etc/networks

networks

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 552 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: