Dell PowerVault 720N Скачать руководство пользователя страница 167

Страница: 167 / 606

File Sharing Between NFS and CIFS Users5-11

/DQJXDJH3URFHGXUHV

You can perform the following operations to query and specify the language that a vol-

ume uses.

Show what languages the filer supports.

Specify a language for the console.

Change the language, and therefore the character set, that a volume uses for file

names.

Create a volume that uses a specified language other than the default.

Show each volume with the language that it uses.

'LVSOD\LQJD/LVWRI6XSSRUWHG/DQJXDJHV

'HVFULSWLRQ

This procedure displays a list of languages for which the filer supports character sets.

You can perform this procedure at any time to determine what language to specify for

a volume if you do not already know what languages are supported.

6WHS

To display a list of the languages for which the filer supports character sets, enter the

following command:

vol lang

6HWWLQJWKH&RQVROH(QFRGLQJ

'HVFULSWLRQ

Use this procedure to set how the console displays non-ASCII information. You would

change the encoding if your console does not accept or display characters properly

using the current encoding. The default encoding is nfs.

6WHS

To set the encoding of the filer console, enter the following command:

options console.encoding

encoding

HQFRGLQJ

is one of the following encoding styles. You can use both NFS extended

(greater than 0x7F) and SGML characters for input.

nfsThe NFS character set of the root volume. You can use both NFS extended

(greater than 0x7F) and SGML characters for input.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 167 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: