Dell PowerVault 720N Скачать руководство пользователя страница 564

Страница: 564 / 606

A-150 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

sm - network status monitor directory

SYNOPSIS

/etc/sm

DESCRIPTION

The network status monitor provides information about the status of network

hosts to clients such as the network lock manager. The network status monitor

keeps its information in the

/etc/sm

directory.

The

/etc/sm/state

file contains an integer that is incremented each time the filer

is booted.

The

/etc/sm/monitor

file contains a list of network hosts the filer is monitoring.

The

/etc/sm/notify

file contains a list of network hosts that made an NLM lock

request to the filer. Each time the filer reboots, it tries to notify the hosts of its

new state information. You can remove this file if you want the filer to stop notify-

ing the hosts in this file.

snap

sched

[

vol

name

[

weeks

[

days

[

hours

[ @

list

] ] ] ] ]

sets the schedule for automatic snapshot creation. The argument

vol

name

identifies the volume the schedule should be applied to. The second argu-

ment indicates how many weekly snapshots should be kept on-line, the third

how many daily, and the fourth how many hourly. If an argument is left off, or

set to zero, then no snapshot of the corresponding type is created. Daily

snapshots are created at 24:00 of each day except Sunday, and weekly snap-

shots are created at 24:00 on Sunday. Only one snapshot is created at a

time. If a weekly snapshot is being created, for instance, no daily or hourly

snapshot will be created even if one would otherwise be scheduled. For

example, the command

snap

sched

vol0

indicates that two weekly snapshots and six daily snapshots of volume

vol0

should be kept on line. No hourly snapshots will be created. For snapshots

created on the hour, an optional list of times can be included, indicating the

hours on which snapshots should occur. For example the command

snap

sched

vol0

8@8,12,16,20

indicates that in addition to the weekly and daily snapshots, eight hourly

snapshots should be kept on line, and that they should be created at 8 am,

12 am, 4 pm, and 8 pm. Hours must be specified in 24-hour notation.

With no argument,

snap

sched

prints the current snapshot schedule for all

volumes in the system. With just the

vol

name

argument, it prints the

schedule for the specified volume.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 564 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: