manualshive.com logo in svg

Dell PowerVault 720N, Справочник по командам, Страница: 568 / 606

Поделиться
Скачать
Dell PowerVault 720N Скачать руководство пользователя страница 568

A-154 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

syslog.conf - syslogd configuration file

DESCRIPTION

The 

syslog.conf

 file is the configuration file for the 

syslogd

 daemon (see 

syslogd

). It consists of lines with two TAB separated fields:

selector     action

The 

selector

 field specifies the types of messages and priorities to which the line 

applies. The 

action

 field specifies the action to be taken if a message the 

syslogd

 

daemon receives matches the selection criteria.

The 

selector

 field is encoded as a 

facility

, a period (”.”), and a 

level

 , with no inter-

vening white-space. Both the 

facility

 and the 

level

 are case insensitive.

The 

facility

 describes the part of the system generating the message, and is one 

of the following keywords: 

auth

, 

cron

, 

daemon

 and 

kern

. Here’s a short descrip-

tion of each 

facil_

i

ty

 keyword:

kern

Messages generated by the filer kernel.

daemon

System daemons, such as the 

rshd

 daemon (see 

rshd

), the routing 

daemon (see 

routed

), the SNMP daemon (see 

snmpd

), etc.

auth

The authentication system, e.g. messages logged for Telnet 

sessions.

cron

The system’s internal cron facility.

The 

level

 describes the severity of the message, and is a keyword from the fol-

lowing ordered list (higher to lower): 

emerg

, 

alert

, 

crit

, 

err

, 

warning

, 

notice

, 

info

, and 

debug

.

Here is a short description of each 

level

 keyword:

emerg

A panic condition that results in the disruption of normal service.

alert

A condition that should be corrected immediately, such as a failed 

disk.

crit

Critical conditions, such as hard disk errors.

err

Errors, such as those resulting from a bad configuration file.

warning

Warning messages.

notice

Conditions that are not error conditions, but that may require spe-

cial handling.

info

Informational messages, such as the hourly uptime message (see 

uptime

).

syslog.conf

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов