Dell PowerVault 720N Скачать руководство пользователя страница 471

Страница: 471 / 606

Command Reference A-57

The route is to a host (otherwise, its to a net).

The route includes valid protocol to link address translation.

The route was modified dynamically by a redirect.

The route has timed out.

The route was manually added with a

route

command (see

route

The route is usable (up).

Direct routes are created for each interface attached to the local host; the gate-

way field for such entries shows the address of the outgoing interface. The refcnt

field gives the current number of active uses of the route. Connection oriented

protocols normally hold on to a single route for the duration of a connection while

connectionless protocols obtain a route whenever they transmit to a destination.

The use field provides a count of the number of packets sent using that route.

The interface entry indicates the network interface utilized for the route.

When

netstat

is invoked with the -

option and an

interval

argument, it displays

a running count of statistics related to network interfaces. An obsolescent ver-

sion of this option used a numeric parameter with no option, and is currently

supported for backward compatibility. This display consists of a column for the

primary interface and a column summarizing information for all interfaces. The

default primary interface is the first interface configured into the system. The pri-

mary interface may be replaced with another interface with the -

option. The first

line of each screen of information contains a summary since the system was last

rebooted. Subsequent lines of output show values accumulated over the preced-

ing interval.

FILES

/etc/hosts

host name database

/etc/networks

network name database

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 471 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: