Dell PowerVault 720N Скачать руководство пользователя страница 432

Страница: 432 / 606

A-18 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

cifs terminate - terminate CIFS service

SYNOPSIS

cifs

terminate

[ -

minutes

] [

workstation

]

DESCRIPTION

The

cifs

terminate

command is used to terminate CIFS service. If the

workstation

operand is specified, then all CIFS sessions open by that workstation will be termi-

nated. If no

workstation

operand is specified, then all CIFS sessions will be

terminated and CIFS service will be shut down completely. To restart CIFS service

after it has been shut down, use the

cifs

restart

command (see

cifs_restart

If CIFS service is terminated for a workstation that has a file open, then that

workstation will not be able to save any changes that it may have cached for that

file, which could result in the loss of data. Therefore, it is

very

important to warn

users before terminating CIFS service. The -

option, described below, can be

used to warn users before terminating CIFS service.

If you run

cifs

terminate

without the -

option and the affected workstations have

open files, then youll be prompted to enter the number of minutes that youd like

to delay before terminating. If you execute

cifs

terminate

from

rsh

you will be

required to supply the -

option since commands executed with

rsh

are unable to

prompt for user input.

OPTIONS

-t

minutes

Specifies the number of minutes to delay before terminating CIFS

service. During the delay the system will periodically send notices

of the impending shutdown to the affected workstations. (Note:

workstations running Windows95/98 or Windows for Workgroups

wont see the notification unless theyre running

WinPopup

.) If the

specified number of minutes is zero, then CIFS service will be ter-

minated immediately.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 432 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: