Dell H815dw, Руководство пользователя

Страница: 364 / 537

364
Faxing
2
After you hear the fax tone, press the (Home) button.
3
Tap

Fax
.
4 Tap
On Hook
.
5
Tap
Receive
.
6
Hang up the hand set of the external telephone.
The printer begins receiving a fax and returns to the standby mode when the reception is completed.
Receiving a Fax Automatically in the Telephone / Fax or Ans Machine/Fax
To use the
Telephone / Fax
or
Ans Machine/Fax
mode, you must connect an external telephone to the
phone connector ( ) on the rear of your printer.
If the caller leaves a message, the answering machine stores the message as it would normally. If your printer hears a
fax tone on the line, it automatically starts to receive a fax.
For details on
Telephone / Fax
or
Ans Machine/Fax
mode, see "Available Fax Settings Options."
NOTE:
If you have set your printer to
Ans Machine/Fax
and your answering machine is switched off, or no answering
machine is connected to your printer, your printer will automatically go into the
Fax
mode after a predefined time.
Receiving a Fax Manually Using an External Telephone (Remote Receive)
You can manually receive a fax from the external telephone without having to go to the printer.
To manually receive a fax using the external telephone, you must connect an external telephone to the phone
connector ( ) on the rear of your printer and also set
Remote Receive
to
On
.
When you receive a call on the external telephone and hear a fax tone, enter the two-digit code from the external
telephone.
The printer receives the document.
When entering the remote receive code from the external telephone, press the number keys slowly in sequence. If
you still hear the fax tone from the remote machine, try entering the two-digit code once again.
The default remote receive code is
00
. You can change the two-digit code to whatever you choose. For details on
changing the code, see "Available Fax Settings Options."
NOTE:
Set the dialing system of your external telephone to DTMF.
Receiving Faxes Using the DRPD
The
DRPD
is a telephone company service which enables a user to use a single telephone line to answer several
different telephone numbers. The particular number someone uses to call you on is identified by different ringing
patterns, which consist of various combinations of long and short ringing sounds.
Before using the Distinctive Ring Pattern Detection option, Distinctive Ring service must be installed on your
telephone line by the telephone company. To set up Distinctive Ring Pattern Detection, you will need another
telephone line at your location, or someone available to dial your fax number from outside.
To set up the DRPD:
1
Press the (Information) button.
2 Tap the
Tools
tab, and then tap
Admin Settings
.
3 Tap
Fax Settings
.
4
Tap
Fax Line Settings
.
5 Tap until
DRPD Pattern
appears, and then tap
DRPD Pattern
.
6 Tap the desired pattern, and then tap
OK
.