Dell H815dw, Руководство пользователя

Страница: 146 / 537

146
Dell™ Printer Configuration Web Tool
Forwarding E-mail
Address 2
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 3
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 4
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 5
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Server Type Sets the server type.
Server Address Sets the server address registered under the server ID.
Server Port Number Sets the server port number.
Login Name Sets the login name.
Login Password Sets the login password.
Re-enter Password Enter the password again to confirm it.
Share Name Sets the shared name.
Server Path Sets the server path.
Redial Attempts Sets the number of redial attempts (0 – 13) to make if the destination fax number is busy. If you enter
0, the printer will not redial.
Interval of Redial Sets the interval (1 – 15 minutes) between redial attempts.
Resend Delay
Sets the interval (3
–
255 seconds) between re-send attempts.
Tone/Pulse Sets whether to use tone or pulse dialing.
Prefix Dial
Sets whether to set a prefix dial number.
Prefix Dial Number Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started.
It is useful for accessing the Private Automatic Branch Exchange (PABX).
Fax Cover Page Sets whether to attach a cover page to faxes.
Fax Header
*1
Sets whether to print the information of the sender on the header of faxes.
ECM Sets whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines
must also support the ECM.
Modem Speed Allows you to adjust the fax modem speed when a fax transmission or reception error occurs.
Display Manual Fax
Recipients
Sets whether to show the fax number of the recipient on the Sending Fax screen when manually
sending a fax.
Fax Activity
Sets whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Fax Transmit Sets whether to print a transmission report after every fax transmission or only when an error occurs.
Fax Broadcast Sets whether to print a transmission report after every fax transmission to multiple destinations or
only when an error occurs.
Fax Protocol Sets whether to print the protocol monitor report after every fax transmission or only when an error
occurs.
*1
This item is not available when Country is set to United States.