D-Link NetDefendOS Скачать руководство пользователя страница 152

Страница: 152 / 912

gw-world:/> dns -cache

An example of output from this command is shown below:

gw-world:/> dns -cache

Name

Status

IP Cnt Address

---------------------------------- ---------- ------ --------------------
my_fqdn_address1

Resolved

server1.example.com

my_fqdn_address2

Unused

The status of a particular FQDN in the cache can be examined with the following command:

gw-world:/> dns -cache <FQDN>

Where <FQDN> is the logical configuration name of the address object in the address book.
Below is a example of output from this command:

gw-world:/> dns -cache my_fqdn_address1

Address : my_fqdn_address1
Status

: Resolved

IP address

LifeTime

--------------------------------------------------

--------

203.0.113.3

299

This information about the DNS cache can also be accessed in the Web Interface by going to
Status > Run-time Information > DNS Cache.

The Cache is Automatically Updated

When the DNS server returns IP addresses for an

FQDN Address

object, it also returns a

Time To

Live

(TTL) value. This value is stored with the entry for the

FQDN Address

object in the DNS cache.

When the TTL expires, NetDefendOS will refresh the cache entry by issuing a new DNS query.

The TTL returned from the DNS server could be very low or even zero. For this reason,
NetDefendOS provides a global DNS setting called

Minimum TTL

. If the TTL returned from a DNS

server is less than the value of

Minimum TTL

, the TTL is reset to be the

Minimum TTL

value.

There is also a second global DNS setting called

Minimum Cache Time

. This value becomes the

TTL if it greater than the TTL from the DNS server. However, the TTL value from the DNS server is
used if it is greater than the

Minimum Cache Time

setting.

Associated Log Messages

NetDefendOS can generate the following log messages associated with

FQDN Address

objects:

•

ipv4_max_addresses - The 128 IPv4 address limit is exceeded and addresses from the DNS
server have been dropped.

•

ipv6_max_addresses - The 128 IPv6 address limit is exceeded and addresses from the DNS
server have been dropped.

•

dns_no_record - The DNS server does not have a record for the FQDN and it cannot be
resolved.

•

dns_timeout - The DNS server has timed out during the FQDN lookup.

•

dns_error - An unspecified error occurred during DNS lookup.

Chapter 3: Fundamentals

152

Содержание NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NetDefendOS

Отзывы:

Похожие инструкции для NetDefendOS

Бренды по названию

Популярные бренды

D-Link NetDefendOS, Руководство пользователя

Результаты поиска

Содержание NetDefendOS

Отзывы:

Похожие инструкции для NetDefendOS

Бренды по названию

Популярные бренды