CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 88 / 365

5.1 Engine Maintenance Information
05-13
Item Qty Type (mm)
Torque
(N·m)
Remark
Bolt M14×1.5 4 M14×1.5 40
Oil drain bolt M14×1.5 1 M14×1.5 25
Screw plug 1 ZM14 20 Cover with thread locker
Drain bolt M12×1.5 1 M12×1.5 20
Flange bolt M8×12.5 (Left
crankcase)
1 M8×12.5 20
Screw cap 1 R21/8 20 Cover with thread locker
Screw R
2
1/8 (Oil line in right
crankcase)
1 R21/8 20 Cover with thread locker
Screw M4×10 (Crankshaft washer
locking nut)
2 M4×1 3 Cover with thread locker
Bolt (Left cover) 2 M5×10 6 Cover with thread locker
Bolt M12×1.25×35 (Magneto rotor) 1 M12×1.25 60
Valve clearance adjusting nut 8 M6 12
Timing chain bolt 2 M8 30 Cover with thread locker
Tensioner bolt plug 2 M16×1.5 4.5
Cylinder locking screw 8 M10 20,60
Pushing nut M8 (Exhaust side) 4 M8 13
Spark Plug 2 M12×1.25 20
Stud M8×42(Exhausting side) 4 M8×42 25 Cover with thread locker
Screw plug M12×1.5 (Front
cylinder head)
1 M12×1.5 20
Screw ST4.8×13 (Thermostat
cover)
2 ST4.8×13 5
Tensioner locking pin 2 M6×16 10 Cover with thread locker
Intake pipe bolt M8×25 4 M8×25 20
Connecting rod bolt 4 M9×1 10,20,60
Drive pulley nut 1 M22×1.5 180 Counter clockwise
Drive pulley bolt (CVT) 1 M12×1.5 60 Counter clockwise
Main drive shaft nut (CVT driven
pulley)
1 M20×1.5 150
Bevel gear locking nut 1 M22×27×1.5 145
Bolt M8×28 (Drive bevel bearing
seat)
4 M8×28 32
Screw M8×25 (Drive bevel bearing
pressing )
4 M8×25 15
Front output shaft bearing retainer 1 M55×1.5 80 Cover with thread locker
Bearing locking nut M65×1.5 1 M65×1.5 110 Cover with thread locker
Bolt M8×28 (Driven bevel bearing
seaat)
4 M8×28 25
Screw T25 (Shifting drum) 1 M5×8 6
Shifting locking spring seat 1 M12×1 20
5.1.7 Engine Tighten Torque