CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 226 / 365

05-151
5.6 Engine Start System
1 Magneto Rotor
2 Magneto Removing Tool
(P/N:0800-031000-922-001)
1 Grease Covering Position
2 Magneto Removing Tool
(P/N:0800-031000-922-001)
1 Bolt 2 Tighten
Sleeve 3
Magneto
Rotor
0515101
0515102
0515103
5.6.5 Magneto Rotor
Removal
Remove Mag-side crankcase cover.
Remove the O-ring and gasket on
crankshaft.
Note: Use crankshaft locking screw
(0800-041000-922-001) to lock the
crankshaft (See Intake Pipe, Cylinder
Head and Cylinder Body).
Use special tool to remove the rotor.
Tool: Magneto removing tool (0800-
031000-922-001)
Note:
Apply grease to magneto puller end prior
to install rotor puller in order to protect
crankshaft.
Fully thread magneto removing tool body
onto the rotor.
Screw in bolt of magneto removing tool (2)
to release the rotor from the crankshaft.
Note:
If the rotor will not release, tapping the
puller bolt with a hammer may assist in
releasing the rotor from the crankshaft.
1
3
2
1
2
1
2