CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 352 / 365

CFMOTO
06-42
6.7.4 Front and rear CV shaft inspection
●The two joints of the CV shaft should rotate freely. If jammed, not smoothly running or
noise in normal angle, replace the parts.
●Inspect the rotating clearance between the joint and splines. If the clearance is more
than 1.5 degrees, replace the part.
●Inspect the rubber boots. Replace if damaged or leaking.
●Inspect the spline and strainer. Replace if worn or damaged.
●Inspect the joint bracket, sleeve, balls, ball tracks and splines. Replace if any trouble is
suspected.
●Inspect other part of CV shafts. Replace the parts if trouble is suspected.
NOTE: Shaft cage universal joint uses MoS2 lithium grease.
Front shaft: Fill 28g ± 5g grease in fixed end cage universal joint, 32g ± 5g grease in
fixed end seal enclosure, 65g±10g grease in axial movement cage universal joint.
Rear shaft: Fill 45g ± 5g grease in fixed end cage universal joint, 50g ± 5g grease in
fixed end seal enclosure, 120g±10g grease in axial movement cage universal joint.