CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 291 / 365

CFMOTO
05-216
Trouble Reason Solution
Engine
overheat
1.Coolant level too low
2.Cooling system has bubble
3.Water temp sensor problem
4.Thermostat cannot open
5.See leaking hole to see leaking
6.Inspect the water hose and clamp
●Water pipe cracked or aging
●Clamp loose
7.Water pump impeller broken
8.Water pump gasket leaking
9.Cylinder head or body gasket leaking
10. Water pump drain bolt leaking
11. Water pump gear wearing
12. Water pump shaft jammed
Refill
Drain the air and refill
Replace
Replace
Replace the water seal
Replace
Tight
Replace
Tight or replace
Replace
Tight or replace the
gasket
Replace
Replace the parts
Lubrication
Oil pressure low or no pressure
1.Inspect the oil level to see case or oil seal
leaking.
●Case broken
●Case bolt loose
●Sealing ring/O-ring/Sealing gasket damaged
●Piston ring broken(Blue smoke)
●Piston ring broken(Pressure low)
●Oil seal damaged or aging
2.Filter plugged
3.Inspect the oil drain bolt
●Case bottom bolt loose
●Crankcase drain bolt loose or without
washer
4.Oil leaking
5.Oil strainer jammed
6.Inspect the oil pump
●Oil pump rotor wearing
●Oil leaking or air income jam the pump
●Oil pump gear broken
●Wrong oil
Replace
Tighten
Replace
Replace
Replace
Replace
Replace the seals
Replace the filter, oil
Tighten
Tight or with washer
Replace the oil seal
Clean, Replace the
strainer
Replace
Replace
Replace
Use recommend oil
Oil becoming
white
1. Leaking indicate the oil and water mixed up and
leaking
2. Cylinder head or body gasket damaged
3. Cylinder head bolt loose
Replace the oil and
water seals
Replace
Tighten or replace the oil
and damaged parts