CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 61 / 365

CFMOTO
03-14
If the coolant level is below the mark
"LOWER" (1), remove the reservoir tank
cap and add coolant to the mark "UPPER"
(2). (See picture 031401)
Recommended Coolant: Any commercially
available coolant that is safe for aluminum.
Standard Mixture Ratio: 50% Coolant - 50%
Water (The freezing temperature varies
according to the mixture ratio. Adjust the
mixture ratio according to freeze protection
required in your area.)
When coolant level is reduced significantly,
inspect the cooling system for leaks. If no
coolant remains in the reservoir tank, there
may be air in the cooling system. Purge the
cooling system of air during the refill.
Coolant Leakage
Inspect radiator hoses, water pump and
connections for leaks.
If any leaks are found, repair the cooling
system. Inspect radiator hoses for aging,
damages and cracks.
Hoses ages over time due to special
working conditions and may crack. Bend a
hose to inspect for cracks. If any damage
or cracks are found, replace it with a new
hose.
Check coolant hose clamps and tighten the
loose ones.
Inspect radiator fins (3) for damages or
mud. Correct any fin bending. Use water
and compressed air to clean off mud or
debris.
The radiator should be replaced when
20% of fins (3) are damaged. (See picture
031402)
Reservior
031401
031402
2
1
3