CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 10 / 365

CFMOTO
01-6
1.4 Specification
● Lubrication
Item Standard Service
limit
Oil capacity Replace oil with filter 2500mL
Total dry 2600mL
Gear oil capacity Total capacity 600mL
Recommend engine oil
20W-50
15W-40，15W-50
10W-40，10W-50
10W-30
5W-40
SAE15W-40 oil for 4-stroke engine.
Select alternative according to the
following specifications.:
API level:SG or higher;
SAE rating: Choose from the left chart
for cold climate operation
Recommend gear oil 75W/90/GL5
Oil pump rotor Clearance between inner and outer rotor 0.06mm~0.14 mm 0.25mm
Clearance between outer rotor and bore 0.09mm~0.15mm 0.25mm
Rotor end clearance 0.023mm~0.109mm 0.20mm
Oil pressure When engine RPM is 1300r/min and oil
temperature is 90°C, oil pressure should
be 100kPa~400kPa, usually is 200kPa.
When engine RPM is 6000r/min and oil
temperature is 90°C, oil pressure should
be 350kPa~700kPa, usually is 580kPa.
●Intake system(See 05-Engine)
●Cooling system
Item Standard Remark
Coolant capacity
Total About 4000mL
Reservoir 200mL~380mL
Density 50%
Opening pressure 108 kPa (1.1kgf/cm 2 )
Thermostat
Open temp. 65°C±2°C
Full open temp. 85°C
Full open clearance >5mm when 85°C,
Relations between
water temp. and
resistance
of water temp
sensor
Coolant temp(°C) Resistant of B
terminal(Ω)
Resistant of A,C
terminal(kΩ)
-20 ---- 28.582±0.004
25 ----- 2.795±0.0025
50 216.0~264.0 0.98±0.00227
80 74.6~90.6 0.334±0.00204
110 32~36 0.133±0.00252
Working temp . of
Thermo switch
Off-on About 88°C
On-off About 82°C
Coolant type 30 °Canti-freezing, anti-corrosive and high boiling point