CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 149 / 365

CFMOTO
05-74
057402
057401
1 Chain Tensioner 2 Screw
1 Start Motor 2 Bolt
The installation is essentially the reverse
of the remove procedure, but pay attention
to the follow details:
Note: Ensure performing proper valve
timing lock crankshaft(see Crankshaft )and
camshaft at TDC ignition(refer to Intake
Manifold, Cylinder Head and Cylinder
section). Install timing chain with camshaft
timing gear then, adjust chain tension
(refer to Intake Manifold, Cylinder Head
and Cylinder section).Loosen crankshaft,
turn 440 degree on clockwise direction
(from CVT side) and camshaft at TDC
ignition. Install timing chain with camshaft
timing gear then, adjust chain tension to
perform proper valve timing(refer to Intake
Manifold, Cylinder Head and Cylinder
section).
Warning: Improper valve timing will
damage engine components.
5.3.5 Timing Chain Tensioner
Removal
Refer to TIMING CHAIN above.
Inspection
Check timing chain tensioner for wear,
cracks or other damage, replace if
necessary.
Installation
The installaiton is the reverse of the
removal procedure.
5.3.6 Crankcase
Note: Before disassembly, drain engin
oil and engine coolant.
Crankcase Disassembly
Note: Before splitting the crankcase,
measure crankshaft axial play(refer to
Crankshaft).
Remove: -Front drive shaft, ring gear(refer
to Front Drive Shaft, Ring Gear)
-CVT cover, CVT, belt, CVT air guide and
clutch(refer to CVT and Clutch)
-Start motor
-Left crankcase cover(refer to Left
Crankcase Cover)
-Drive gears(refer to Drive Gears)
Note: Oil pump removal from crankcase
is not necessary, but recommended to see
the condition of oil pump.
1
2
1
2