CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 80 / 365

5.1 Engine Maintenance Information
05-5
5.1.2 Fuel, Engine Oil, Gear Oil and
Coolant
Fuel: Use RQ-92# gasoline or higher
Oil: SAE15W-40, SG or higher level in API.
If SAE15W-40 engine oil is not available,
follow the chart on the right to choose
one oil according to the enviornment
temperature.
Gear oil: 75W
/
90 GL
-
5
Engine coolant: Coolant has anti-freeze
liquid properties. The frozen temp is lower
than enviorment temperature (Typically -5
degrees C or lower).
Recommend: -30ºC, high level anti-freeze,
rust and high boil point coolant that is safe
for aluminum.
DANGER: Coolant is poisonous.
WARNING: Do not mix the coolant with different brands.
5.1.3
Engine Break-in
There are many movable components inside the engine, such as piston, piston ring,
cylinder, crankshaft, gears and ect. During initial use period, proper run-in for every
critical component is necessary. Break-in can help engine components match each other
and adjust working condition. Careful treatment of a new engine will ensure the engine
has more efficient performance and a longer service life.
Recommended break-in period: First 600km
Operation guide:
0~300km: Do not operate continously at more than 50% throttle position. Cool down
the engine for every 5~10 minutes after every one hour operation. Avoid sudden
acceleration.Vary the throttle position slowly and smoothly.
300km~600km: Avoid long-time running at more than 75% throttle position. Do not open
throttle completely during this period.
NOTE:
1.Maintain and repair with regular procedures during break-in period.
2.After break-in, check and maintain the engine before normal use.
NOTE: Follow the maintenance chart in break-in period. And troubleshoot the engine
in time. After break-in, get a full 600km break-in maintenance before normal operation.
20W-50
15W-40，15W-50
10W-40，10W-50
10W-30
5W-40