CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 242 / 365

05-167
5.8 Cooling System
Testing Cap
(P/N:901-18.01.00-922-001)
0516702
0516701
5.8.2 General
Warning
Never start the engine without coolant.
Some engine parts such as the rotary seal
on the water pump shaft can be damaged.
During installation, use the torque values
and service products as indicated in the
exploded views.
Warning
Torque wrench tightening specifications
muststrictly be adhered to. Locking
devices(e.g.: locking tabs, plastic lock
nuts, self-locking fasteners, etc.) must be
installed or replaced with new ones where
specified. If the efficiency of a locking
device is impaired, it must be replaced.
5.8.3 Inspection
Cooling System Sealing Test
Warning
To avoid potential injuries, don’t remove
the radiator cap or loosen the cooling drain
plug if the engine is hot.
Remove battery cover to access and
remove radiator cap.
Install the test cap (P/N 901-18.01.00-922-
001) on the filler neck.
U s e a p r e s s u r e / v a c c u m p u m p t o
pressurize system to 103kpa (15PSI).
1 Testing Cap
(P/N: 901-18.01.00-922-001)
1